Looking for a creative and thoughtful way to present gift cards? Look no further! In this article, you will discover a collection of easy and fun DIY projects that will take your gift-giving game to the next level. These personalized gift card holder crafts are not only simple to make, but also add a personal touch to your presents. Whether you’re celebrating a birthday, holiday, or special occasion, these DIYs are sure to impress the recipient and make the gift-giving experience even more memorable. Get ready to unleash your creativity and spread joy with these fabulous gift card holder ideas!
This image is property of images.pexels.com.
Fabric Pocket Gift Card Holder
Materials Needed
- Fabric of your choice
- Sewing machine or needle and thread
- Scissors
- Ribbon or trim (optional)
- Iron
Instructions
-
Start by selecting the fabric for your gift card holder. You can choose a festive holiday-themed fabric or something that matches the recipient’s personal style. Make sure to pick a fabric that is sturdy enough to hold a gift card.
-
Cut a rectangle from the fabric, measuring approximately 8 inches by 12 inches. This will be the main body of your gift card holder.
-
Fold the fabric in half lengthwise, with the wrong sides together. Press the fold with an iron to create a crease.
-
Using a sewing machine or needle and thread, sew along the two sides of the fabric rectangle, leaving the top (folded) edge open. If using a sewing machine, use a straight stitch and backstitch at the beginning and end. If hand sewing, use small, neat stitches to secure the sides.
-
Trim any excess fabric and clip the corners to reduce bulk. Turn the fabric right side out through the open top edge.
-
Press the fabric holder with an iron to flatten the seams and create a crisp edge.
-
To create a pocket for the gift card, fold the bottom edge of the fabric pocket up, leaving enough space to easily slide the gift card in and out. You can secure the folded edge with a few hand stitches or use a small amount of fabric glue.
-
If desired, embellish the gift card holder with ribbon, trim, or buttons. This will add a personal touch and make the holder even more special.
Variations
- Instead of sewing the fabric, you can use fabric glue or fusible webbing to create a no-sew version of the pocket holder.
- Add embroidery or applique to the fabric for a more personalized touch.
- Experiment with different fabric prints, textures, and colors to create unique gift card holders for different occasions.
Envelope Gift Card Holder
Materials Needed
- Colored or patterned paper
- Scissors
- Glue or double-sided tape
- Ribbon or washi tape (optional)
- Stickers or embellishments (optional)
Instructions
-
Start by selecting a piece of colored or patterned paper for your gift card holder. The paper should be large enough to hold a gift card and fold into an envelope shape.
-
Cut the paper into a rectangle shape, measuring approximately 8 inches by 6 inches. This will be the main body of your envelope.
-
With the patterned side facing down, fold the paper in half horizontally. Press the fold with your finger or an iron to create a crease.
-
Open up the folded paper and fold the top and bottom edges towards the center crease. This will create a pocket for the gift card.
-
Apply glue or double-sided tape along the folded edges to secure them in place. Make sure to leave the top edge open so you can easily insert and remove the gift card.
-
If desired, decorate the outside of the envelope with ribbon, washi tape, stickers, or other embellishments. This will add a personal touch and make the envelope more festive.
Variations
- Experiment with different paper colors and patterns to match the occasion or recipient’s preferences.
- Create a seal for the envelope by folding a small strip of paper into a triangle and gluing it to the top flap.
- Use a hole punch to create a small hole on the top flap and tie a ribbon through it for added decoration.
This image is property of images.pexels.com.
Origami Gift Card Holder
Materials Needed
- Square origami paper or colored paper cut into a square
- Scissors (if using colored paper)
- Folding instructions (available online or in an origami book)
Instructions
-
Start with a square piece of origami paper or cut a square from colored paper if preferred. The square should be large enough to hold a gift card and fold into a pocket.
-
Follow the folding instructions for the specific origami gift card holder you want to create. There are various designs available, ranging from simple to more complex.
-
Carefully fold the paper according to the instructions, making sure to crease each fold well. This will ensure that your gift card holder stays in shape and securely holds the gift card.
-
Once you have finished folding, insert the gift card into the pocket of the origami holder. The folds should keep the gift card in place and prevent it from falling out.
Variations
- Use different colored or patterned paper to create unique origami gift card holders.
- Add your own embellishments, such as stickers or drawings, to personalize the gift card holder.
- Experiment with different origami designs and techniques to create a collection of gift card holders for different occasions.
Photo Frame Gift Card Holder
Materials Needed
- Small photo frame
- Cardstock or heavy paper
- Scissors
- Glue or double-sided tape
- Ribbon or twine (optional)
- Stickers or embellishments (optional)
Instructions
-
Start by removing the back of the small photo frame. This will create a pocket for the gift card to be placed.
-
Cut a piece of cardstock or heavy paper to fit the size of the frame’s back. Make sure the paper is sturdy enough to hold a gift card.
-
Decorate the cardstock or heavy paper with markers, stickers, or other embellishments. You can add a personalized message or design that relates to the occasion or recipient.
-
Once you have finished decorating, insert the cardstock or heavy paper into the photo frame, with the decorated side facing out.
-
Place the gift card behind the cardstock or heavy paper, securing it in the pocket created by the frame.
-
If desired, tie a ribbon or twine around the photo frame to add a decorative touch. You can also attach additional stickers or embellishments to the frame for more personalization.
Variations
- Use a larger photo frame and multiple layers of cardstock or heavy paper to create a more intricate gift card holder.
- Instead of inserting the cardstock or heavy paper into the frame, create a pocket by gluing or taping the paper to the back of the frame, leaving the top open for the gift card.
- Experiment with different frame designs, such as vintage or ornate frames, to give your gift card holder a unique look.
This image is property of images.pexels.com.
Mason Jar Gift Card Holder
Materials Needed
- Mason jar
- Cardstock or heavy paper
- Scissors
- Glue or double-sided tape
- Ribbon or twine (optional)
- Stickers or embellishments (optional)
Instructions
-
Start by selecting a mason jar that is the appropriate size to hold a gift card. You can use a new jar or repurpose an old one.
-
Cut a piece of cardstock or heavy paper to fit the size of the mason jar’s lid. This will create a surface for attaching the gift card.
-
Decorate the cardstock or heavy paper with markers, stickers, or other embellishments. You can add a personalized message or design that reflects the occasion or recipient.
-
Once you have finished decorating, attach the cardstock or heavy paper to the mason jar’s lid using glue or double-sided tape. Make sure the attachment is secure and that the gift card will fit on top.
-
Place the gift card on top of the decorated lid, making sure it is centered and secure.
-
Screw the mason jar lid onto the jar, creating a gift card holder that is both decorative and functional.
-
If desired, tie a ribbon or twine around the mason jar for added decoration. You can also attach additional stickers or embellishments to the jar to further personalize it.
Variations
- Fill the mason jar with small trinkets or candies in addition to the gift card, creating a unique and personalized gift.
- Use different sizes or shapes of mason jars to create a collection of gift card holders for different occasions.
- Attach a small tag or label to the jar with a handwritten note or message for an extra special touch.
Paper Bag Gift Card Holder
Materials Needed
- Paper bag (lunch size or small gift bag)
- Colored or patterned paper
- Scissors
- Glue or double-sided tape
- Ribbon or twine (optional)
- Stickers or embellishments (optional)
Instructions
-
Start by selecting a paper bag that is an appropriate size to hold a gift card. This could be a lunch size bag or a small gift bag.
-
Cut a piece of colored or patterned paper to fit the front side of the paper bag. This will be the main decorative element of the gift card holder.
-
Glue or tape the colored or patterned paper to the front side of the paper bag. Make sure it is centered and secure.
-
Decorate the colored or patterned paper with stickers, drawings, or other embellishments. Add a personalized message or design that relates to the occasion or recipient.
-
Open the paper bag and place the gift card inside. If the gift card is smaller than the bag, you can fold the top of the bag to create a pocket for the gift card.
-
If desired, tie a ribbon or twine around the folded top of the bag to secure it and add a decorative touch. You can also attach additional stickers or embellishments to the bag for more personalization.
Variations
- Experiment with different colored or patterned paper for the front of the paper bag to create unique gift card holders.
- Add a small tag or label to the bag with a handwritten note or message for an extra special touch.
- Attach a small gift or trinket to the bag handles to make the gift card holder even more exciting.
This image is property of images.unsplash.com.
Greeting Card Gift Card Holder
Materials Needed
- Blank greeting card
- Colored or patterned paper
- Scissors
- Glue or double-sided tape
- Ribbon or twine (optional)
- Stickers or embellishments (optional)
Instructions
-
Start by selecting a blank greeting card that is suitable for the occasion or recipient. Make sure the card is large enough to hold a gift card.
-
Cut a piece of colored or patterned paper to fit the inside of the greeting card. This will be the main pocket for holding the gift card.
-
Glue or tape the colored or patterned paper to the inside of the greeting card, leaving the top edge open to easily insert and remove the gift card.
-
Decorate the front of the greeting card with stickers, drawings, or other embellishments. Add a personalized message or design that relates to the occasion or recipient.
-
Insert the gift card into the pocket created by the colored or patterned paper inside the greeting card. Make sure it is secure and centered.
-
If desired, tie a ribbon or twine around the greeting card for added decoration. You can also attach additional stickers or embellishments to the card for more personalization.
Variations
- Use different types of greeting cards, such as pop-up or interactive cards, to create unique gift card holders.
- Add a removable tag or label to the card with a handwritten note or message for an extra special touch.
- Experiment with different colors and textures of paper for the pocket inside the card to create a layered or textured effect.
Matchbox Gift Card Holder
Materials Needed
- Matchbox
- Colored or patterned paper
- Scissors
- Glue or double-sided tape
- Ribbon or twine (optional)
- Stickers or embellishments (optional)
Instructions
-
Start by finding an empty matchbox that is clean and in good condition. You can use a regular matchbox or a fancy decorative one.
-
Measure the dimensions of the matchbox, and cut a piece of colored or patterned paper to fit around the outside of the matchbox. This will be the main decorative element of the gift card holder.
-
Glue or tape the colored or patterned paper around the outside of the matchbox, making sure it is centered and secure.
-
Decorate the top of the matchbox with stickers, drawings, or other embellishments. Add a personalized message or design that relates to the occasion or recipient.
-
Gently slide the matchbox open and place the gift card inside. The matchbox will hold the gift card securely.
-
If desired, tie a ribbon or twine around the matchbox for added decoration. You can also attach additional stickers or embellishments to the matchbox for more personalization.
Variations
- Use a larger box, such as a jewelry box, and modify it to hold a gift card.
- Create a layered effect by wrapping the matchbox with multiple pieces of colored or patterned paper.
- Attach a small gift or trinket to the matchbox, using ribbon or twine, to make the gift card holder even more exciting.
This image is property of images.unsplash.com.
Wooden Block Gift Card Holder
Materials Needed
- Small wooden block
- Saw (if necessary)
- Sandpaper
- Paint or stain
- Paintbrush or sponge
- Clear varnish or sealant (optional)
- Drill and small drill bit (optional)
- Ribbon or twine (optional)
- Stickers or embellishments (optional)
Instructions
-
Start by selecting a small wooden block that is large enough to hold a gift card. You can purchase pre-made wooden blocks or cut your own from a larger piece of wood using a saw.
-
If necessary, use sandpaper to smooth any rough edges or surfaces of the wooden block. This will ensure a clean and polished final product.
-
Decide whether you want to paint or stain the wooden block. Choose a color or finish that matches the occasion or recipient’s preferences.
-
Using a paintbrush or sponge, apply the paint or stain to the wooden block, making sure to cover all sides. Allow the paint or stain to dry completely before moving on to the next step.
-
If desired, apply a clear varnish or sealant to the wooden block to protect the finish and give it a glossy appearance. Allow the varnish or sealant to dry according to the manufacturer’s instructions.
-
If you want to attach the gift card to the wooden block, use a drill and small drill bit to create a hole or notch in the block. This will hold the gift card securely in place.
-
Decorate the wooden block with stickers, drawings, or other embellishments. Add a personalized message or design that relates to the occasion or recipient.
-
If desired, tie a ribbon or twine around the wooden block for added decoration. You can also attach additional stickers or embellishments to the block for more personalization.
Variations
- Create a set of wooden blocks, each with a different design or color, to hold multiple gift cards.
- Use wood burning tools or carving techniques to create intricate designs or personalized messages on the wooden block.
- Add a small tag or label to the wooden block with a handwritten note or message for an extra special touch.
Scrapbook Gift Card Holder
Materials Needed
- Scrapbook paper or cardstock
- Scissors
- Glue or double-sided tape
- Paper trimmer or ruler and craft knife (optional)
- Punches or die cuts (optional)
- Ribbon or twine (optional)
- Stickers or embellishments (optional)
Instructions
-
Start by selecting a sheet of scrapbook paper or cardstock that is large enough to hold a gift card. You can choose a patterned paper for a decorative look or a solid-colored paper for a simpler design.
-
Measure and cut the scrapbook paper or cardstock to the desired size for your gift card holder. It should be slightly larger than the gift card to allow for easy insertion and removal.
-
Fold the scrapbook paper or cardstock in half, creating a pocket for the gift card. Press the fold with your finger or an iron to create a crease.
-
Use glue or double-sided tape to seal the sides of the pocket, leaving the top edge open. Make sure the adhesive is secure and the pocket is well-formed.
-
If desired, trim the edges of the pocket using a paper trimmer or a ruler and craft knife. This will create a neater and more polished look.
-
Decorate the front of the pocket with stickers, die cuts, or other embellishments. Add a personalized message or design that relates to the occasion or recipient.
-
If desired, tie a ribbon or twine around the pocket for added decoration. You can also attach additional stickers or embellishments to the pocket for more personalization.
Variations
- Use different patterns or colors of scrapbook paper or cardstock to create unique gift card holders.
- Create a layered effect by using multiple pieces of paper or cardstock to construct the pocket.
- Add a strip of clear acetate or vellum to the front of the pocket, creating a window to display the gift card.
Now that you have learned how to create a variety of personalized gift card holders, you can add a special touch to your gift-giving. Whether you choose to make a fabric pocket holder, an origami design, or any of the other creative options, your recipients will appreciate the thought and effort you put into their special gift. Have fun experimenting with different materials, colors, and designs to create a one-of-a-kind gift card holder that reflects your personal style and the unique personality of the person receiving it. Happy crafting!